Skip to Content

How To Make a Silicone Mold: DIY Ring Cone

Have you ever wondered how to make a silicone mold?

Learn how to make a silicone mold! This cone-shaped mold is perfect for a number of craft ideas including a faux-marble ring cone.

“This post was sponsored by ETI-USA. All opinions expressed are truly are our own: we wouldn’t be sharing products with you that we didn’t love to use ourselves.  Also, this post contains affiliate links for your shopping convenience. You can read our full disclosure statement here.”

We are very excited to be over on the Resin Craft Blog sharing our tutorial on how to make this marbled cone ring holder using Castin’Craft FastCast Urethane Casting Resin. Happily, I now have a beautiful place to store and display my rings when I’m not wearing them.

Learn how to make these gorgeous faux-marble ring cones with a DIY silicone mold! Fun jewelry organization idea.

To make the faux-marbled ring cone we first needed to make our own cone-shaped silicone mold.

Our work as #ResinCraftsCreativeTeam members with ETI-USA has given us an opportunity to experiment with many different products such as this EasyMold Silicone Putty. It’s ideal for a wide range of impression type mold applications including resin, epoxy, plaster, concrete, wax, soap, low melt metals, baking, chocolates, ice cubes and air dry clay.  The creative possibilities are literally endless!

We also recently made these faux-stone beads using Easy-Sculpt self hardening epoxy modeling clay. Check it out, can you tell that they’re not real stones?

How to Make a Silicone Mold

Supplies Needed to Make a Cone-Shaped Silicone Mold

EasyMold Silicone Putty used to make your own silicone molds.

Instructions for a DIY Cone-Shaped Silicone Mold

Step 1: Create a cone out of card stock paper

  1. To begin, draw and cut a circle out of the card stock paper. The height of your cone will be determined by the size of your circle. For example, I started with a 6″ wide circle to make a 3″ high cone.
  2. Draw a triangle wedge about ¼ size of the circle and then cut the triangle wedge out of the circle.
  3. Wrap the cut sides of the disc together, overlapping as needed until the base measures about 1 ½” diameter. Then tape the paper cone closed.

Step 2: Make the silicone mold

Remember to work very quickly!  Not exaggerating here:  EasyMold Silicone Putty has 3 minutes of working time at regular room temperature!  Mix only enough to make one mold at a time.

1. Start by measuring equal sized amounts of components A & B.  For this 3” high cone, my components were each about the size of a small golf ball.

How to make a silicone mold using EasyMold silicone putty.
2. Next, quickly knead together equal amounts of components A & B until you get a uniform colour (about 1 minute).

3. Roll the kneaded components into a ball and then flatten so you have enough to wrap fully around the outside of the paper cone.  Press putty firmly around the paper cone.

4. Leave the paper cone inside the putty for 25 minutes while it cures.

5.  Finally, remove the paper cone. The new silicone mold needs to cure at room temperature for 24 hours before using it with the FastCast product. Be sure to read and follow the manufacturer’s instructions for cure times when using a silicone mold with other materials.

Now head on over to the Resin Crafts Blog for the full DIY faux-marbled ring cone tutorial.

Learn how to make your own silicone mold to use for a variety of DIY and craft ideas such as these trendy jewelry cones.

I’ve been wondering how to make a silicone mold for a while now and am amazed at how easy and quick it was! I’m now looking around my house at all the other shapes I can make a mold from and all the uses for them, like candles, bath bombs, soaps, chocolate, decor, …(I really could just keep going on and on and on…).

What molds would you make with the EasyMold Silicone Putty?

Like it? Pin it for later!

Learn how to make your own silicone mold to use for a variety of DIY and craft ideas such as these trendy jewelry cones.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

tod kellow

Saturday 24th of March 2018

IV wanted to use some of the wood decorative pieces on my furniture for added decorative appeal. These are ornate curved and sometimes floral pieces that have a flat back for smooth adherence. But, they are so expensive to use on these refinished pieces, your doing it for purpose of a resale standpoint. Do u believe the silicone molding would work on these wood pieces that may be able to make them out of plaster of Paris or a similar liquid product. And what's the probability that the silicone mould would pull away and release itself from the molded piece? Thank you for your answer in advance.

Jane and Sonja

Friday 30th of March 2018

Hi Tod. Yes, those pieces do get really expensive! While you could use the Silicone Putty which we used for this project, we'd actually recommend the EasyMold Silicone Rubber ( https://www.eti-usa.com/easymold-silicone-rubber ) . You'll see the sample on the box is exactly what you're describing. The rubber is more of a liquid so will give you the detail you need. Then, we'd suggest looking at the FastCast product to make the pieces with if you are planning to paint them ( https://www.eti-usa.com/fastcast ). Once cured, the silicone sticks to very few things so we're quite confident that you'll be able to get your pieces out of the mold without a problem. Let us know if you have any further questions! -Jane

This site uses Akismet to reduce spam. Learn how your comment data is processed.