To cut the tshirt, lay tshirt down on a flat surface with the front side up and cut off the bottom hem just above the stitching.
Next, cut out the sleeves along the armhole seams on the side of the body.
Then cut out the neckband creating a large scoop at the front and back.
Along the bottom opening, cut evenly sized strips measuring 4” long x 3/4” wide.
Continue along the entire length of the bottom opening.
If you want to add an iron-on decal, upload the ‘Vacation Mode Tshirt’ project template on to a blank canvas in Cricut.
Resize the design to fit your tshirt bag.
Select ‘Make It’ in the top right corner to see the design on the mat and make sure the “Mirror On” toggle is set.
When cut is done, unload and use a weeder to remove the excess vinyl.
Place the Cricut Easy Press mat inside the prepared tshirt bag to preheat the fabric.
Place the vacation mode glitter iron-on vinyl on the tshirt in the desired location.
Apply the heat to the iron on vinyl and then remove the plastic covering to reveal the new fun design.
To finish the tshirt bag, starting on one side and working your way across to the other side, knot one front fringe with one back fringe as shown.
Continue until all the fringe is knotted together and the bottom opening is sealed.
And that’s all it takes to turn a tshirt into a bag! Time to head to the pool!