• Begin by mixing together equal parts of Resin and Hardener in a small measuring cup. Stir completely for two minutes.
• Transfer the mixture into a second measuring cup and continue stirring for an additional minute.
• Divide the mixed resin into three separate cups.
• Into separate cups drop a few drops of white, pink and grey paint. Stir each completely with separate stir sticks.
• Pour each of the tinted resins into separate mold compartments, about ¾ full.
• In the white compartment, drop in some gray resin. Use the stir stick to swirl the the gray and white resin together.
• In the pink compartment, add some gray resin and swirl around.
• In the gray compartment, add some pink resin and swirl around.
• Continue layering in the different colors until each compartment is full.
• Continue until the mold is filled. Consider sprinkling bit of clear glitter in a couple areas of the mold.
• After about 15 to 20 minutes blow off any air bubbles that have risen to the top of the mold.
• Make sure that the molds are on a level surface and covered to prevent any dust from settling in. Let the resin cure overnight.

Adding the Hooks to the Resin

• Remove the faux marble pieces from the mold.
• Cut a piece of 6″ wide balsa wood to 12″ long. Arrange the faux marble resin pieces until you are happy with how they look.
• Drill holes through the resin and into the balsa wood. Make sure the drill bit is just large enough for the cup hook screw to go into.
• Screw the cup hook into the resin piece.
• Place some E6000 glue on the the back of the resin piece and then screw into the wood.
• Set aside and let dry.

Mounting the Hooks to the Wall

• Attach velcro-style mounting strips to the back of the hanger.