DIY Resin Feather Pendants
Create a beautiful watercolor effect with these DIY resin feather pendants.
Ingredients
- Feather silicone mold
- Mold release/conditioner
- EasyCast Clear Casting Epoxy
- Transparent Dyes Green, Red, Yellow and Blue
- Toothpicks
- Disposable work surface/gloves/cups/stirring sticks
- Drill and drill bits
- Jewelry hardware
Instructions
- To begin, mix exactly equal amounts of Resin and Hardener into a small measuring cup.
- Stir continuously for 2 minutes, scraping the sides of the container.
- Pour the mixture into a second cup and stir for an additional minute (use a new stir stick). Scrape the sides of the container as you mix.
- Carefully pour the resin into the feather mold compartments.
- Carefully place one drop each of red, blue, green, orange and yellow (or any colours your choose) transparent resin dye onto a plastic plate.
- With a toothpick, randomly place drops of different colours throughout the liquid resin.
- Using the toothpick, draw out the drops of dye through the resin. Try and follow the patterns in the feather mold.
- Once finished with the dye, carefully blow off any airbubbles from the surface of the resin using a straw.
- Cover the resin feathers and allow to cure for 24 hours (will fully cure after 72 hours).
- Carefully drill a small hole through the stem of the feather. Add a 5mm jump ring through the hole and string on any other embellishments you’d like.
- Add a 10mm jump ring for hanging.
Tried this recipe?Let us know how it was!