Go Back

Iron On Spider Web Art with Free SVG

Jane and Sonja
Create your own unique spider web art using an embroidery hoop and a spider web design in iron-on vinyl with this free SVG cutting file.
5 from 1 vote
Print Recipe Pin Recipe

Ingredients
  

  • Spider Web SVG
  • Embroidery Hoop 10” diameter
  • 100% cotton woven fabric in white
  • Cricut Maker
  • Everyday Iron On Vinyl Black
  • Cricut Standard Grip Mat
  • Weeding Tool
  • Scissors
  • EasyPress 2
  • EasyPress Mat or Towel

Instructions
 

Pre-work:

  • With a pencil, trace the outside of the embroidery hoop on the fabric.

Preparing the Image:

  • Click on the Upload button from the toolbar to insert the Spider Web SVG file onto the canvas.
  • Maintain the size at 10.125” across or adjust by highlighting the image and clicking on the size box in the top toolbar.

Cutting the Iron-On Vinyl:

  • Select “Make It” in the upper right corner to proceed with cutting.
  • Click the “Mirror” toggle button to on.
  • Cut the Everyday Iron-On Vinyl width to fit on the standard grip mat. Press continue.
  • Choose Everyday Iron-On Vinyl from the list of options in the drop down menu.
  • Place the Iron-On vinyl directly onto the standard grip mat with the SHINY SIDE DOWN.
  • Following the instructions prompted on the screen, cut out the vinyl.

Preparing the Cut Image:

  • Using a weeding tool, peel away the excess vinyl leaving only the spider web image.

Applying the Image with the Cricut EasyPress 2:

  • Position the mat or a towel on a flat surface.
  • Set the temperature and time on the machine.
  • Preheat the fabric (the cut circle shape) for 5 seconds.
  • Place the cut image on the fabric with the shiny side up.
  • Press the image on to the fabric for 30 seconds with light pressure.
  • Turn the fabric upside down and apply heat for another 15 seconds.
  • Peel the plastic part of the vinyl off carefully once it cools and discard.

Assembling the Hoop Art

  • Insert the fabric into the embroidery hoop, after centering so that all vinyl edges are sandwiched inside the hoop, tighten the screw.
  • Trim away the excess fabric and hang to enjoy!
Keyword cricut, diy, Halloween
Tried this recipe?Let us know how it was!