Open Creative Space app on mobile phone.

Turn on XTool P2.

Connect Creative Space app to machine.

Click on create project.

Tap to start editing.

Import Image - “Cutest Bunny in Town Photo Prop” SVG.

Leave the plastic protective layer on both sides of the acrylic sheet. Load the first sheet into the machine. Choose the color you wish for the base and the color for the top layer.

Secure the acrylic with the magnets on the sides.

Move to the home screen, set material type to “3mm acrylic sheet (opaque, glossy)” (an XTool material). Select ok.

Maintain the size of the photo prop at 8” diameter and position it on top of the material.

Move the base layer (solid circle shape) to a different layer and hide the image as well as select “ignore” for time being to avoid cutting in the same material color as the top layer.

With the top layer selected, ensure the machine parameter setting tab is set to “cut”. Adjust the process settings to 60% power and 28 seconds (or your preferred acrylic cutting settings based on the test grid you performed).

Double check the placement.

Hit process.

Remove when cutting is complete.

Insert the other color of acrylic in to the machine.

Unide the 2nd layer to expose the base circle shape. And likewise, hide the top layer cutout and indicate ignore for cutting.

Double check the placement.

Hit process.

Remove when cutting is complete.

Peel away the plastic protective covering.

Using a hot glue gun, adhere the two sides of the photo prop together to complete.