• Open Creative Space and select a new project.
• Insert the trinket tray SVG file onto the canvas.
• Upload the flower design from the birth month you wish to use. Reduce the size to approx. 2.75”.
• Change the font to “xx” and then reduce the size of the name accordingly to fit beside the flower design. Ensure the letters are WELDED together before engraving.
• Repeat for the other birth flowers you wish to use.
• Group the name with the flower together and then space the others apart evenly. Highlight all and group together.
• Position them on top of the rectangular shaped trinket tray shape and center them horizontally and vertically using the align tool.
• Set the material type to 6mm basswood and use your preferred cut and engrave settings.
• Insert the material into the xTool P2 and refresh your screen.
• Position the design onto the surface and proceed to cutting and follow the prompts on the screen.

Assembling the Trinket Tray

• Once cutting and engraving is complete, remove from the machine. Use a damp paper towel to wipe away the excess dust and scorching marks.
• With a soft paintbrush, apply a coat of wood stain or diluted brown acrylic paint. Leave it to dry and repeat if darker stain is desired.
• Once dry, apply a coat of Mod Podge to seal the surface. Glue the top layer to the base layer with wood glue. Press together until glue is dry.