Go Back

DIY 2-Player Game with XTool P2

Jane & Sonja
Create a fun and interactive 2-player game with xTool P2 easily at home using this SVG design and our step by step instructions.
No ratings yet

Ingredients
  

  • XTool P2
  • Basswood Plywood size 3mm 9”x12” wide or 12”x12”
  • 2 sheets Basswood Plywood size 6mm 12”x12”
  • Acrylic sheet, opaque size 3mm, 12”x12” in two contrasting colors
  • 4 in a Row Game SVG
  • Wood Glue

Instructions
 

  • Open the Creative Space app and turn on the xTool P2. Connect the Creative Space app to the machine.
  • Import the SVG files for all the layers of the from your downloads.

Cutting the Divider Piece (“Layer 1”)

  • Load the 3mm basswood material into the cutting machine. Secure the wood with the magnets on the sides.
  • Move to the home screen, set material type to “3mm basswood plywood”.
  • Ensure the machine parameter setting tab is set to “cut”.
  • Adjust the settings to your preferred power and speed based on your test cut grid. In our case, cutting basswood works best with 45% power and 28 seconds.
  • Double check the placement.
  • Hit process.
  • Remove when cutting is complete.

Cutting the Main Pieces (“Layer 2”)

  • Load the 6mm basswood material into the cutting machine. Secure the wood with the magnets on the sides.
  • Move to the home screen, set material type to “6mm basswood plywood”.
  • Ensure the machine parameter setting tab is set to “cut”.
  • Adjust the settings to your preferred power and speed based on your test cut grid. In our case, cutting basswood works best with 65% power and 28 seconds with 2 passes.
  • Double check the placement.
  • Hit process.
  • Remove when cutting is complete.

Cutting the Tokens (“Layers 3 & 4”)

  • Load the first acrylic sheet material into the cutting machine. Secure the wood with the magnets on the sides.
  • Move to the home screen, set material type to “3mm acrylic white”.
  • Ensure the machine parameter setting tab is set to “cut”.
  • Adjust the settings to your preferred power and speed based on your test cut grid. In our case, cutting acrylic works best with 100% power and 20 seconds.
  • Double check the placement.
  • Hit process.
  • Remove when cutting is complete.
  • Repeat with the other acrylic sheet color.
  • Peel off the protective paper from each token.

Assembling the Game

  • With back sides facing, glue the divider piece in between the two main pieces, aligning the bottom and side edges. Ensure the “wider” bottom edge is aligned across all three pieces.
  • Place a heavy object over top until glue sets.
  • Glue the stands to the bottom corners of the game. Alternatively, you can leave the stands loose. Leave it to dry fully.
  • Game is set to play!
Tried this recipe?Let us know how it was!