How to Make Dangle Earrings with Resin
Don't go out shopping to try to find the jewellery to match your outfit when you can make resin earrings all on your own.
Ingredients
- EnviroTex Jewelry Resin kit
- Earring stud backings and pins
- Red glitter
- Castin’ Craft Mold Release
- EasyCast Resin Jewelry Molds
- Gloves wooden craft sticks, toothpicks, paper towels, small paint brush, straw
- Drill or Drill Press with 3/16” diamond drill bit optional
Instructions
- Apply a mold release / conditioner to the jewelry molds as per the instructions in the package.
- Mix exactly equal amounts of Resin and Hardener into one measuring cup.
- Stir continuously for 2 minutes, scraping the sides of the container.
- Pour the mixture into a second cup and stir for an additional minute, scraping the sides of the container and stir stick.
- Once combined add a generous amount of glitter to the desired molds.
- Pour the resin into your desired jewelry molds to the top of the mold.
- Gently blow off any air bubbles that have risen to the surface of the resin. Cover the pieces to keep dust out and let cure overnight. 24 hours for a soft cure and up to 72 hours for fully cured jewelry.
- Remove the pieces from the mold.
- For the pendant drill a small hole into the top of the resin through it you can insert a round jump ring.
Tried this recipe?Let us know how it was!