Hi friends! Today, we’re sharing this simple boho-inspired jewelry hanger tutorial along with other creative jewelry display ideas.

Homemade Jewelry Display Ideas
Collecting driftwood for DIY and crafts is one of my favorite things to do. I’ve made so many different things from this large driftwood mirror, this feather wall decor to these cute driftwood reindeer ornaments. So using a piece of driftwood to make a simple jewelry display seemed pretty practical to me!

I love my jewelry but if I don’t see it right in front of me I’ll likely forget to put it on. Or worse, when I do decide to wear a necklace but find they are all knotted together inside my jewelry box! So for these reasons, this DIY jewelry display really comes in handy. I hope you find it handy too!
Materials Needed to Make a Boho Driftwood Jewelry Hanger:
Disclosure: This post contains affiliate links for your shopping convenience. Should you chose to purchase through these links we make a small commission at no extra cost to you. You can read our full disclosure here.
- Driftwood, about 11” long x 2” diameter
- Gold Hooks
- Drill with small drill bit
- Wood glue
- Suede Tie

How to Make a Driftwood Jewelry Display:
Lay driftwood down on a flat surface.

Using a straight ruler and pencil, measure and mark 2” from either end of the driftwood piece.

Measure the distance in between the two markings and calculate an additional 3 evenly spaced markings.

Using a drill with a small 1/16” drill bit, drill a small pilot hole at each of the 5 markings.

Add some wood glue to the end of the hook screw and screw one hook into the pre-drilled hole.
Secure in place. Repeat for remaining 4 hooks.

Cut a piece of suede tie measuring 30” long.

Attach each end to the driftwood and hang.

How easy is that?! Even I was amazed at how quickly it came together, that I made a couple more to hang on the wall. I love how simply it displays all my jewelry.

Other Creative Jewelry Display Ideas
For more DIY jewelry display ideas, check out these beautiful options. Which one would you like to make?
Rustic Glam Jewelry Organizer

Repurposed Cedar Plank Accessory Organizer

Anthropologie Inspired Faux Marble Jewelry Hooks

Jewelry Organizer Frame
Jewelry Organizer for Earrings
Faux-Marble Ring Cone
And don’t forget about the rings, check out this creative DIY jewelry organizer.

Like it? Pin it for later!


Creative Jewelry Display Ideas
Materials
- Driftwood 11” long x 2” diameter
- Gold Hooks
- Drill with small drill bit
- Wood glue
- Suede Tie
Instructions
- Lay driftwood down on a flat surface.
- Using a straight ruler and pencil, measure and mark 2” from either end of the driftwood piece.
- Measure the distance in between the two markings and calculate an additional 3 evenly spaced markings.
- Using a drill with a small 1/16” drill bit, drill a small pilot hole at each of the 5 markings.
- Add some wood glue to the end of the hook screw and screw one hook into the pre-drilled hole.
- Secure in place. Repeat for remaining 4 hooks.
- Cut a piece of suede tie measuring 30” long. Attach each end to the driftwood and hang.
Scarlet
What a fun driftwood craft! Thanks for the jewelry display diy idea!
Jane and Sonja
You’re very welcome! It’s a fun one for sure!